Ring Doorbell Screwdriver Size

Ring Doorbell Screwdriver Size

When installing or carrying out maintenance on your Ring Video doorbell, you are almost certain to need screwdrivers. But you must know the right type and size of screwdrivers to use for each process, and that’s what I will be showing you in this article.

Here are some tips for choosing the right screwdriver for your Ring Doorbell:

  • Make sure the screwdriver has a magnetic tip. This will help you to keep the screw in place while you are removing or installing it.
  • Make sure the screwdriver is the correct size for the screw you are removing or installing. If you use a screwdriver that is too small, you may strip the screw.
  • Use a screwdriver that is in good condition. A worn or damaged screwdriver may strip the screw
  • Choose a screwdriver with the right length shaft. The shaft of the screwdriver should be long enough to reach the screws that hold your Ring doorbell in place. However, it should not be so long that it is difficult to control the screwdriver.

The Different Types Of Screw That Ring Doorbells Require

Ring Video Doorbells typically use a variety of screws and anchors for installation, depending on the specific model, the mounting surface, and the type of bracket or mount you’re using. Here are some common types of screws and anchors you might encounter during the installation of a Ring Video Doorbell:

1. Security Screws: Ring Doorbells are often equipped with 2 security screws that require a unique screwdriver bit for installation and removal. These screws help deter theft or tampering.

The security screws include:

  1. Torx T6 security screws: These screws are used to mount the Ring Doorbell 1 and Ring Doorbell 2 to the faceplate. They have a star-shaped head and require a Torx T6 screwdriver to remove or install.
  2. Torx T15 security screws: These screws are used to secure the Ring Doorbell Pro and Ring Doorbell Elite to the faceplate. They also have a star-shaped head, but they are larger than the T6 screws and require a Torx T15 screwdriver.

Note: Do not use any other screws apart from the security screws that are shipped with your Ring video doorbell.

This is to ensure:

  • Proper security and tamper proof
  • There is no damage to the faceplate
  • You do not invalidate your warranty
  • Ring also warns that using another screw other than the provided security screws may damage the batteries during installation or cause a fire or other saftey hazard

2. Wood Screws: If you’re mounting the Ring Doorbell to your door or wall, you’ll likely use wood screws. These screws are designed to secure the mounting bracket to the wooden frame of your door or wall.

Your Ring video doorbell comes with 4 wood screws.

3. Masonry Screws: For installation on brick, concrete, stucco, or other masonry surfaces, masonry screws or anchors may be used. These are typically used with appropriate wall anchors for stability.

4. Mounting Screws: These are the screws that secure the mounting bracket to the wall.

5. Plastic Anchors: In some cases, plastic anchors may be provided to use in conjunction with masonry drill bits for when mounting on drywall, brick, concrete, stucco, or other surfaces where standard screws alone may not provide adequate support.

If you are unsure of which screw size your Ring Doorbell uses, you can consult your Ring Doorbell’s owner’s manual. You can also find this information on the Ring website.

Here are some tips for removing and replacing Ring doorbell screws:

  • Apply gentle pressure to the screwdriver when removing the screws. Do not apply too much pressure, or you could strip the screws.
  • If a screw is stuck, try using a little bit of penetrating oil to loosen it.
  • When replacing the screws, be sure to tighten them until they are snug. Do not overtighten the screws, or you could damage the doorbell.

It’s essential to follow the specific installation instructions provided with your Ring Video Doorbell model and to use the screws and anchors recommended for your particular installation scenario.

This ensures the stability and security of the doorbell, as well as the protection of your investment. If you have lost any screws or require additional parts for your Ring Doorbell installation, you can contact Ring customer support or visit their official website for replacement parts and guidance.

Please go to this page to find the right installation manual with prerequisites for your Ring Video Doorbell model.

Torx Security Screw Size

Torx Security Screws for Ring video doorbells come in 2 sizes:

The T6 and the T15.

Name Torx T6 Security Screw Torx T15 Security Screw
Size 1.70mm 3.27mm
Use Smaller screw size used for Ring Video Doorbell and Ring Video Doorbell 2 Larger screw size used for Ring Video Doorbell Pro and Ring Video Doorbell Pro

Benefits of using T6 and T15 security screws:

  • Security: T6 and T15 security screws are more difficult to remove than standard Torx screws, which makes them more secure. This is important for the Ring Video Doorbell, as it deters theft and vandalism.
  • Tamper-proof: T6 and T15 security screws are also tamper-proof, meaning that they cannot be easily removed without the correct screwdriver. This helps to protect the Ring Video Doorbell from unauthorized access.
  • Durability: T6 and T15 security screws are made of durable materials, which helps to prevent them from stripping or breaking. This is important for the Ring Video Doorbell, as it is exposed to the elements.

How to remove or install a T6 and T15 security screws:

  1. To remove or install a T6 or T15 security screw, you will need a T6 and T15 security screwdriver respectively. T6 and T15 security screwdrivers have a pin that fits into the hole in the center of the screw. This allows the screwdriver to engage with the screw and remove or install it.
  2. To remove a T6 and T15 security screw, insert the screwdriver into the screw head and apply pressure. Turn the screwdriver counterclockwise to remove the screw.
  3. To install a T6 or T15 security screw, insert the screwdriver into the screw head and apply pressure. Turn the screwdriver clockwise to install the screw.

Mounting Screw Size

The mounting screw is a screw that is used to secure the mounting bracket into the wall or anchor if you are using an anchor.

The mounting screws used for Ring Video Doorbell are comparable to standard wood screws. Specifically, the screw size used for Ring Video Doorbells is Phil 2#, F+ST3*25TP1. This may not make a lot of sense to you but it sure will to your local hardware store.

What Screwdriver(s) Do You Need For Ring Doorbells

You need

  • A Philips head screwdriver for the mounting screws
  • The star-shaped end of the included screwdriver for the security screws to match the Torx heads of the screws
  • For wood screws, you can use either the star-shaped or flat-shaped end of a fitting size screwdriver.

Precautions When Installing a Ring Video Doorbell

Ring Video Doorbells have become a popular choice for enhancing home security and convenience. Installing a Ring Video Doorbell is a relatively straightforward process, but it’s essential to take certain precautions to ensure a successful installation that maximizes the device’s functionality and security.

Point 1 – Prior Research and Compatibility Check

Before you begin the installation process, it’s crucial to research the specific Ring Video Doorbell model you have and ensure it is compatible with your home’s existing wiring or power sources. Different Ring models may have varying requirements and compatibility specifications.

Point 2 – Turn Off Power

If your installation involves wiring the doorbell to your home’s electrical system, be sure to turn off the power at the circuit breaker or fuse box. This prevents the risk of electrical shock during the installation process.

Point 3 – Weatherproofing

Ring Video Doorbells are designed for outdoor use, but it’s essential to follow the manufacturer’s guidelines for weatherproofing. Ensure that all connections and the doorbell itself are adequately protected against rain, snow, or other adverse weather conditions.

Point 4 – Adequate Wi-Fi Signal

Ring Doorbells require a strong Wi-Fi signal for optimal performance. Ensure that your Wi-Fi network reaches the installation location, and that there’s a strong and stable connection. Consider using a Wi-Fi range extender if needed.

Point 5 – Proper Mounting Height and Level

Install the Ring Video Doorbell at the appropriate height, typically at eye level for most visitors. This provides the best angle for the camera to capture clear images of people at your door.

Point 6 – Choose the Right Mounting Surface

Ring Video Doorbells are versatile and can be mounted on various surfaces, including wood, stucco, brick, and concrete. Ensure that you have the necessary tools and hardware for your specific mounting surface. Use anchors, if needed, to provide a secure and stable installation.

Point 7 – Safety With Tools

When using tools during the installation, be cautious to avoid injury. Keep any screws, drill bits, or other small parts in a secure container to prevent them from falling and potentially injuring you or damaging the device.

Point 8 – Secure Network and Password

Make sure to set up a strong and unique password for your WIFI, device, and Ring account. This helps protect you from unauthorized access.

Point 9 – Ongoing Maintenance

Regularly clean the camera lens to ensure clear video footage and keep the device’s firmware up to date to benefit from security and performance improvements.

Brady Klinger-Meyers is an experienced writer and marketer with who currently writes for Robodens as well as other popular sites like MakeUseOf and Techzillo. At Robodens, he focuses on general smart home advice with his interest being accessories and gadgets. Read our Editorial Guidelines and Fact Checking process.


Please enter your comment!
Please enter your name here